You should keep the pole at a minimum length of 1.5m. You will have difficulty keeping the pole from wrapping around the tree or branch you are cutting. Cutting with shorter poles is difficult. A shorter blade can be used to cut branches up to 4 cm (3,8 cm) if your pole is too long.
-
The first step is to determine which side of the tree you want to cut, and then attach the pole saws cable. This can be done with any kind of knot but we recommend using the bowline knot as it is stable and easy to untie.
-
After you have tied the cable, ensure that there is a little slack at each end. Next, remove the pole saw from the holster on your opposite side of the area where you are going to cut. You could get hurt if there isn’t enough slack. This can cause friction when you attempt to cut through the tree or branch. Too much slack can cause the cable to tangle when you cut. When you tie it off, aim for less than 1 inch (22.5 cm) of play on each end.
-
After that, place the pole saw on the ground directly below the area you want to cut. Then slide the saw up to the branch or tree that you wish to remove. You should not wrap the cable around branches or trees as this can cause friction and increase your chances of injury.
-
Begin by applying light pressure to your grip handle with both hands. Then, pull down gently on each side of the branch. Keep applying pressure until the branch is removed from the tree’s trunk.
-
Don’t pull on your pole saw too hard if it gets stuck. Try taking a step back to cut diagonally around the knot that is holding the cable to the tree. This will often free you from stubborn knots and restore your pole saw to its former glory. If this doesn’t work, you might need to try another knot.
These are some tips to keep in mind when operating a pole chainsaw. Also, ensure you have all the safety gear that is required for your operation.
How To Use A Pole Chain Saw
There are many ways to use a pole chainsaw. However, they can be used for cutting objects suspended in the air (like a branch of a tree), or for cutting things too high that you cannot reach with your arms (such an overhead power line). These are the steps to do both.
Cut A Branch Suspended In Mid-air
- With one hand, place the blade of the pole chainsaw against the tree. Then, use the other hand to hold the pole’s bottom just below the blade. Pull down on the tree and press inwardly on both sides, until you hear a crackling sound.
- Once the branch is separated from the tree trunk, you have two options: let gravity do the work and bring the branch down to your level, or push the pole downward until it reaches your height.
- After the branch has fallen, tie a piece or twine around it. Then pull on the string to ensure that the branch is secured.
Cutting An Overhead Line (or Any Other Too High For You)
- As you climb up to the task of cutting, use a ladder or tall objects such as a bucket lid or garbage can lid for support.
- Cut the power line carefully so that it falls in the desired place.
- To ensure that the wire is not thrown around or lying on the ground, tie it off with twine. By doing this, no one can accidentally touch or fall on an electrified wire.
The Benefits Of Using A Pole-chain Saw
A pole chainsaw has many benefits, but they are best for certain tasks. This tool is great for cutting branches off trees that are too high to reach with an electric or gas-powered saw, but can be used manually. You can also adjust the length of the saw by attaching it a shorter or longer pole to increase or decrease your motion range.
Tips To Choose The Best Pole Chainsaw For You:
- You want to make sure the pole chain saw that you choose is durable and won’t crack after just one use.
- A small manual model is ideal if you have a tight space and need a cutting tool for home maintenance.
- An extension cord is a great option for large projects such as clearing briars. It allows you to move more freely and gives you greater control.
- The quietest electric pole chainsaws are available. This is an excellent choice if you’re looking for a tranquil environment while still being able to do quick tasks.
- Gas-powered pole saws are more powerful and can tackle many heavy-duty projects.
- It is important to consider the ergonomics of a pole-chain saw.
FAQ,s
How to safely use a pole-chain saw?
It doesn’t matter if you are responsible for trimming the overgrown branches of a tree or removing any fallen branches, it is important that you understand how to properly use a pole chainsaw to prevent injury. Children should not be allowed to use electrical appliances if they aren’t supervised. These are the safety precautions that everyone should take when using this type of equipment.
Wear the right gear. If your pole chainsaw weighs more that 5 kg (4.5kg), you will need protective gloves made of leather or another durable material. These gloves will protect your hands while you use the saw for long periods of time. Safety goggles, steel-toe boots and thick clothing are essential to ensure that nothing is cut by the blade when you’re sawing at branches or other objects.
Warning
Wear proper safety gear, including gloves, sturdy shoes, and eye protection, when operating a pole chainsaw.
Final Thoughts
A pole chainsaw is an extremely powerful tool that can be used to remove logs and trees. This tool may be the right one for you if your property is home to large trees or other hazards. These are some tips from experts in the field to help you safely and effectively use a chainsaw. Before you use any power equipment, such as a chainsaw, make sure that there aren’t any high-pressure gas lines nearby. They could explode and cause serious consequences.
