9 Common Problems With Husqvarna Chainsaws + How To Fix Them
Share it
The forestry industry would not be complete without Husqvarna, which is the most innovative brand of chainsaws in the world. It does have issues, just like all powerful machines. These are not uncommon considering the amount of work it requires.
We will discuss the most common issues with Husqvarna chainsaws as well as the possible solutions.
Are Husqvarna Chainsaws Any Good?
Husqvarna chainsaws are regarded as the best ever made, due to their outstanding performance in the forest industry.
Husqvarna chainsaws are well-respected, but what really sets them apart is their rich history in the chainsaw market.
9 Common Husqvarna Issues With Chainsaws And How To Troubleshoot
Problem #1: Husqvarna Chainsaw Won’t Start
Defective Ignition System
A faulty ignition system is one of the main reasons why aHusqvarna’s chainsaw won’t start. Check for spark plug problems and get a replacement. To ignite sparks, clean the corrosion with a steel toothbrush.
Ignition Coil
To inspect a defective ignition coil, use an ignition coil tester. It is time to make use of the reserve if it is defective.
Clogged Carburetor
To clear a clogged carburetor you need to pull the pull start until all fuel is gone. Clogged drains are often caused by leaving oil on your chainsaw for too long.
Contaminated oil ports
Husqvarna chainsaws can leak oil due to their two oil inlets. It is common for them to have oil leakage. To prevent oil contamination, clean the chainsaw with a small and pointed wire after each use.
Cold Weather
Chainsaw engines can become inactive when the weather changes. To pull it out, use a choke.
Recoil Starter
Without the recoil starter assembly engaging with the crankshaft, your engine may become defective. Pull and release the start rope to inspect the engine. Replace it if it does not work.
Spring Damaged Rewind
We recommend that you do not attempt to repair damaged rewind springs if the problem is yours.
If the springs are worn, the rope won’t recoil onto your chainsaw pulley. It is cheaper to replace the starter assembly than purchasing an entire kit.
Problem #2: Husqvarna Chainsaw Stalls
Filter for dirty fuel
Bad oil can cause damage to the fuel filter. This is why Husqvarna chainsaws stalls.
A thick, sticky fuel can cause a chainsaw engine to stall. To fix a bad fuel filter, replace old oil with high-quality fuel.
Filter Clogged
Dirt and debris can build up, which can lead to dirty filters. Gas fumes can be sucked in place of air when this happens. This can cause the chainsaw to stall or work.
An engine that is too loud will cause it to be less efficient and will produce more carbon deposits. As part of maintenance, it is important to replace the air filter regularly.
Defective Spark Arrestor
Spark arrestors can become clogged or defective and can ignite hot sparks, which can set off a fire in your chainsaw. Although it is a tiny screen, the spark arrestor is essential and stops sparks from being emitted on your engine.
It can block the exhaust, which can cause the engine to stall.
Problem #3: Husqvarna Chainsaw Not Cutting
Untuned Chain
Chainsaws need stretch and tension in the strings. If you have the wrong chain direction, it will not create enough tension to prevent you from cutting.
It is important to tune your screw adjustment as loose screws can lead to chain displacement. This will cause less vibration when your saw runs.
Chattering Chain
Chainsaw teeth can become dull after repeated use due to pressure on the edges when they are sharpened.
We noticed that the chain gets the most work than the rest, leading to chattering. The wood chips’ curvy cuts require that the chain be sharpened. Each model will need a different round filer.
Chain bar Worn Out
Chainsaws can stop cutting if they have worn-out chains. Bars that are easily damaged or worn out can be caused by poor lubrication. Use chain oil to lubricate bent bars and immediately replace them.
Defective Clutch
When the clutch drum is not under enough pressure, the clutch pads wear out. A bad clutch can damage your chainsaw. If this happens, it is necessary to immediately replace the entire clutch assembly.
Problem #4: Husqvarna Chainsaw Won’t Stay Running
The Husqvarna chainsaw won’t start. This is a common problem. This problem could be caused by old fuel, dirty carburetors and clogged vents.
To avoid stress and the expense of professional repair service, ensure you review the following.
Problem #5: Husqvarna Chainsaw Keeps Turning
Chainsaws that have malfunctioning clutches or defective return springs will continue to turn even after they are turned off. You can’t fix sticky clutch pads other than replacing them.
Problem #6: Husqvarna Chainsaw Has Stiff Guide Bar Grooves
Remove the cover from the drive case and take the bar and chain apart to fix the stiff bar groove. Use a small screwdriver to clean the grooves and a file for flattening the nicks.
Problem #7: Flooded Engine
Overfilled fuel pumps can cause flooded engines. To quickly fix problems like these, drain all fuel from the saw’s fuel tank. Turn the throttle and pull the cord while you turn the throttle. You can then deactivate your choke and clean up any residue.
Problem #8: Husqvarna Chainsaw Vibrates
Loosening chains can cause excessive vibration on your chainsaw. This common problem can be fixed by tightening the teeth with the tension adjusters.
Maintenance And Care Tips
To keep your machine in top condition, you can follow these simple maintenance tips.
Tip #1: Regular Cleaning After Each Use
Make sure to clean all parts of your chainsaw. To avoid sparking on the sprocket nose or inlet hole, and to prevent damage to the groove bar, clean your chainsaw from all debris.
Tip #2: After Replacing The Chain, Rotate The Guide Bar
After sharpening the chains, rotate the guide bars manually.
Tip #3: Check Chain Tension And Lubrication
To prevent rusting, make sure your chainsaw gets adequate lubrication when you purchase it. To avoid stiffness, make sure you inspect your chain tension regularly.
Tip #4: Keep The Chain Sharp
To avoid causing damage to your chainsaw, it is important that the chainsaw chains are kept in a sharp state. To maintain sharpness, use the right file size and angle.
Tip #5 – Check The Cleanliness Of Your Air Filters
Clogged air filters are one of the most common problems with Husqvarna Chainsaws. Regular cleaning and replacement of air filters is a good idea.
Carbon collection is worse if the saw is run at an inefficient speed. Use compressed air to easily clean the filter.
Tip #6: Don’t Race The Engine
When cutting, don’t overwork the engines. This tool may be the most powerful, but it is important to use the correct cutting techniques to avoid overworking the engine.
Tip #7 – Always Use Fresh Gasoline
When maintaining a Husqvarna, fresh gasoline is the best. A dull chain can often be caused by unlubricated teeth.
Weather conditions can affect the oil mixture, causing it to easily break down if left on your saw. To avoid Husqvarna’s chainsaw problems, it is recommended not to mix new gasoline with old fuel.
Important Husqvarna Chainsaw Components
- Rope Attachment: With starter rope attachments, it is easier to use your chainsaws. To get the best support while working on a project, attach the rope to a branch of a tree.
- X-torq : This component in your Husqvarna chainsaw reduces harmful emissions and makes it compliant with environmental standards. It also ensures that the proper fuel mixture and fuel consumption are consistent with normal use.
- Side-mounted tensioner : This allows for a more efficient tensioning of the chains.
- Cover for the air filter: This is a common replacement component that can be used to replace a damaged spark plug. A plastic cover is required for any plastic filters.
- Chain break windows: You can see the tip of the guide bar with windows.
- Chain brake: Activating break prevents accidents when kickback happens.
- An adjustable oil pump: This oil pump makes it easier to manage oil flow based on climate and application.
How To Properly Start A Husqvarna Chainsaw
You can use a chainsaw in the right way. Knowing how to do this is crucial for anyone who wants one.
1. Before you remove the cover, lay the chainsaw flat on a surface.
2. To ensure safety, activate the chainsaw chain brake. This will help prevent mishandled saws causing accidents.
3. To properly start Husqvarna, use the Husqvarna smart-start button
4. To see the fuel level clearly, push the primer bulb.
5. Pull the ripcord towards the right with your dominant hand.
6. Your right foot will pull the rear handle, and your left hand will keep the saw steady.
7. Keep pulling the ripcord until the chainsaw starts running fully. Then, hold the throttle at mid-range.
How To Choose The Right Husqvarna Chainsaw For You
For Beginners
A large industrial model is not the best choice for beginners. They don’t know anything about chainsaws technically. Our team recommends the Husqvarna 445, which is the lightest and most compact type.
For professionals
Professionals will prefer machines with longer chain bars and more horsepower. Seasoned professionals can work on larger projects and have more wood to work with, so this is a good choice.
A Husqvarna 440 is the ideal model for working in conditions that require sawing large trees or ranches.
Low maintenance
Manual chores are not for everyone. Some people don’t have the time or luxury to read the manual every day.
A Husqvarna is the best machine to co-opt this piece of low-maintenance equipment.
Model Comparison: Electric vs. Natural Gas
An electric chainsaw is more appropriate for residential spaces, which require quieter and more eco-friendly machines. It is not designed for heavy-duty work and is recommended for occasional use.
The gas-powered chainsaw is best for difficult tasks. However, it makes too much noise so it is not recommended for use in close proximity to your home.
The Best Husqvarna Chainsaw Today
The Husqvarna Rancher Chainsaw 460 61cm Rancher Chainsaw was our top choice out of all models.
This model’s chainsaw engine is powered by a 60cc 2-stroke engine. It has a cutting blade that can handle any log material and is not obstructed by wood dust or wood dust.
Professionals love the Rancher Chainsaw 460 61cm in length. It is a highly sought-after power tool due to its powerful cutting blades and ability to perforate logs twice as large.
FAQ
My Husqvarna Husqvarna chainsaw is not starting.
There are a few reasons why your Husqvarna chainsaw won’t start. It is best to check these three areas Fuel and Spark and Air. Common culprits are clogged carburetors or old fuel. A damaged spark plug or faulty ignitions are another cause.
What is the H and L of a Husqvarna Chainsaw?
Husqvarna chainsaws have H and L letters that indicate the screws that must be adjusted to ensure proper operation. L stands for low speed and regulates the fuel mixture at low speeds. The H is for high speed and regulates oil during high speeds.
How can you start a Husqvarna chainsaw that is flooded?
The chain brake should be turned on. Place your other knee on top of the saw’s powerhead to keep it steady. You should ensure that the choke is not in use.
To activate the chainsaws at a rapid idle speed, engage the trigger assembly. You can press the throttle completely while pulling the rope with your other hand multiple times.
How do you clean a Husqvarna Chainsaw?
Remove the spark plug cover and use a file for cleaning this area of your Husqvarna Chainsaw. To inspect the area, remove the spark plug cover and pull the spark arrestor filter screen. Use a wire brush to clean the area or go for complete replacement.
To avoid problems with start-ups, we recommend that you use fresh and clean gasoline. To clean out an oil tank that is drained, use gasoline. Remove the bolts and nuts from the cooling fins.
How do you attach a Husqvarna Chainsaw to a chain?
Release tension from the chain and remove it. Turn off the screw and attach the new chain to the saw’s teeth. Adjust the chain to the guidebar and then change the sideplate of the equipment. Turn the bolts until you achieve the desired tension.
How do you measure a Husqvarna Chainsaw Bar?
Begin at the bar tip and work your way to the cutter on the body of the saw. Round it to the nearest even number for a complete measurement.
Conclusion
Although it is inevitable that Husqvarna chainsaws will have some issues, it is undeniable this chainsaw still offers quality results and takes less time.
We have provided simple maintenance tips that you can use to keep your premium power tool in good condition.
